TINTM is a slightly yellow odorless liquid. It is a non-hazardous material. The material is classified as a static accumulator. Although the material has a relatively low vapor pressure, it should be handled only with adequate ventilation and in areas where ignition sources have been removed (e.g. open flames, static electricity sources, unprotected light switches). The flash point for TINTM is >201ºF / >94ºC
TINTM is a high molecular weight monomeric plasticizer primarily used in wire and cable applications. Excellent performance in Heat-resistance, Chemical Resistance. Palatinol TNTM provides desirable properties in vinyl applications which require good plasticizer/resin compatibility, low volatility, resistance to extraction by soapy water and good electrical properties. Palatinol TNTM is often a good substitute for polyester polymeric plasticizers in low volatility applications where improvements in processing are desired. Palatinol TNTM is suitable alone or in combination with Palatinol 11P-E for: 90° and 105° wire insulation and interior automotive applications (instrument panel skins).
Data and information contained in this document is presented as received from producers. While data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.